Samsung Washer SilverCare Washer User Guide

Samsung SilverCare™  
Washer Owners Manual  
Register your product at  
Code No.: DC68-02346B-03-EN  
 
Safety Precautions  
Congratulations on your new Samsung SilverCareWasher. This manual contains important information  
on the installation, use, and care of your appliance. Please take time to read this manual to take full  
advantage of yourWasher’s many benefits and features.  
What you need to know about Safety Instructions  
WarningsandImportantSafetyInstructionsinthismanualdonotcoverallpossibleconditionsandsituationsthatmayoccur.  
Itisyourresponsibilitytousecommonsense,caution,andcarewheninstalling,maintaining,andoperatingyourWasher.  
IMPORTANT SAFETY SYMBOLS, WORDS, LABELS  
WARNING – Hazards or unsafe practices that COULD result in severe personal injury or death.  
CAUTION – Hazards or unsafe practices that COULD result in minor personal injury or property damage.  
WARNING – To reduce the risk of fire, explosion, electric shock, or personal injury when  
using your dryer, follow the basic safety precautions below:  
1. Read all instructions before using the appliance.  
2. As with any equipment using electricity and moving parts, potential hazards exist. To safely  
operate this appliance, become familiar with its operation and exercise care when using it.  
3. Install and store yourWasher away from weather exposure.  
4. Install and level yourWasher on a floor that can support its weight.  
5. YourWasher must be properly grounded. Never plug it into an ungrounded outlet. See page A2 for details.  
6. To avoid the possibility of fire or explosion:  
Do not wash items that have been washed, soaked, or treated with gasoline, dry cleaning  
solvents, or other flammable or explosive substances. They give off vapors that could ignite or  
explode. Any material that has been exposed to cleaning solvent or other flammable liquids  
or solids should not be placed in yourWasher until all traces of such liquids, solids, and fumes  
have been removed. Offending items include acetone, denatured alcohol, gasoline, kerosene,  
certain liquid household cleaners and spot removers, turpentine, waxes, and wax removers  
Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the  
wash water. They give off vapors that could ignite or explode.  
Under certain conditions, hydrogen gas may be produced in a hot water system that has not  
been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has  
not been used for two weeks or more, turn on all hot water faucets and let the water flow for  
several minutes before using yourWasher. This will release any hydrogen gas build–up. Since  
the gas is flammable, do not smoke or use open flame during this time.  
7. Unplug power cord before attempting to service yourWasher.  
8. Do not reach into the appliance when the tumbler is moving.  
9. Do not let children play on or in yourWasher. Close supervision is a must when children are near theWasher.  
10.Do not tamper with controls.  
11.Do not repair, replace, or service any part of yourWasher unless you fully understand the  
recommended user–repair instructions and have the skills to carry them out.  
12.Store laundry aids and other material in a cool, dry place out of children’s reach.  
13.Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain  
some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.  
14.Do not use chlorine bleach, ammonia, or acids (such as vinegar or rust remover) in the same wash.  
Hazardous fumes can form.  
15.Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in following  
loads and cause skin irritation.  
16.Before yourWasher is removed from service or discarded, remove the door to the washing  
compartment to avoid the danger of children or small animals getting trapped inside.  
17.Do not sit on top of yourWasher.  
18.Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for  
bulges, kinks, cuts, wear or leaks, and replace them every five years.  
19.Ensure pockets are free from small irregularly shaped hard objects, foreign material, etc. ie. coins,  
knives, pins, etc. These objects could damage your washer.  
20.Do not wash clothing with large buckles, buttons, or other heavy metal.  
SAVETHESEINSTRUCTIONS
 
Table of Contents  
InstallingYourWasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1  
UNPACKINGYOURWASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1  
OVERVIEW OFYOURWASHER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1  
GROUNDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2  
WATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2  
DRAIN FACILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3  
FLOORING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3  
LOCATION CONSIDERATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3  
ALCOVE OR CLOSET INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3  
IMPORTANTTO INSTALLER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4  
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1  
LOADINGYOURWASHER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1  
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2  
Washing a Load of Laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1  
OVERVIEW OFTHE CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1  
CHILD LOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4  
GARMENT +. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4  
MY CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4  
FOR SILVERCAREWASHING (SELECT MODELS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5  
DETERGENT USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-6  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-6  
MaintainingYourWasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1  
CLEANINGTHE INTERIOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1  
CLEANINGTHE DISPENSERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1  
STORINGYOURWASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-1  
CHECKTHESE POINTS IFYOURWASHER.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-1  
INFORMATION CODES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-3  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-1  
FABRIC CARE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-1  
PROTECTINGTHE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-2  
DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-2  
SPECIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-2  
CYCLE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-3  
32  
 
InstallingYourWasher  
UNPACKINGYOURWASHER  
Unpack yourWasher and inspect it for shipping damage. Make sure you have received all of the items  
shown below.  
If yourWasher was damaged during shipping, or you do not have all of the items, contact 1-800-  
SAMSUNG.  
OVERVIEW OFYOURWASHER  
Cold water supply hose  
Hot water supply hose  
Detergent drawer  
Control panel  
Door  
Drain Hose  
Adjustable leg  
Spanner  
Bolt hole covers  
Water Supply Hose  
Hose guide  
SAMSUNG ClothesWasher Owner’s Instructions A-1  
 
InstallingYourWasher  
BASIC LOCATION REQUIREMENTS:  
ELECTRICAL  
120Volt 60 Hz 15 AMP fuse or circuit breaker  
Individual branch circuit serving only yourWasher is recommended.  
YourWasher is equipped with a power cord.  
NEVER USE AN EXTENSION CORD.  
GROUNDING  
ELECTRICAL GROUNDING IS REQUIRED ONTHIS APPLIANCE.  
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the  
risk of electric shock by providing a path of least resistance for electric current.  
This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly  
installed and grounded outlet.  
WARNING - Improper connection of the equipment-grounding conductor can result in a  
risk of electrical shock. Check with a qualified electrician or serviceman if you  
are in doubt as to whether the appliance is properly grounded. Do not modify  
the plug provided with the appliance – if it does not fit the outlet, have a proper  
outlet installed by a qualified electrician.  
IMPORTANT SAFETY PRECAUTIONS  
To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding  
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision  
and local codes and ordinances. It is the personal responsibility of the appliance owner to provide  
adequate electrical service for this appliance.  
NEVER CONNECT GROUNDWIRETO PLASTIC PLUMBING LINES, GAS LINES, OR  
HOTWATER PIPES.  
WATER  
To correctly fill yourWasher in the proper amount of time, water pressure of 20 – 120 psi is required.  
Water pressure less than 20 psi may cause water valve failure, not allowing the water valve to shut off  
completely. Or it may extend the fill time beyond what yourWasher controls allow, resulting in your  
Washer turning off. A time limit is built into the controls in the event of an internal hose becoming loose  
and flooding your home.  
The water faucets must be within 4 feet/122cm of the back of yourWasher for the inlet hoses provided  
with yourWasher.  
NOTE: Accessory inlet hoses are available in various lengths up to 10 feet/305cm for faucets that are  
further away from the back of yourWasher.  
To avoid the possibility of water damage:  
Have water faucets easily accessible  
Turn off faucets whenWasher is not in use.  
Periodically check there is no leakage at water inlet hose fittings.  
WARNING - CHECK ALL CONNECTIONS ATTHEWATERVALVE AND FAUCET FOR LEAKS.  
A-2 SAMSUNG ClothesWasher Owner’s Instructions  
 
InstallingYourWasher  
DRAIN FACILITY  
The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed through the  
drain hose clip to the standpipe. Standpipe must be large enough to accept the outside diameter of the  
drain hose. The drain hose is attached at the factory.  
FLOORING  
For best performance, yourWasher must be installed on a solidly constructed floor. Wood floors may  
need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft tile  
surfaces are contributing factors in vibration and/or tendency for yourWasher to move slightly during  
the spin cycle.  
Never install yourWasher on a platform or weakly supported structure.  
LOCATION CONSIDERATIONS  
Do not install yourWasher in areas where water may freeze, since yourWasher will always maintain  
some water in its water valve, pump, and hose areas. This can cause damage to belts, pump, hoses and  
other components. Operating temperature should be above 60°F/16°C.  
ALCOVE OR CLOSET INSTALLATION  
MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:  
Sides – 1 in / 25 mm  
Top – 17 in / 432 mm  
Rear – 2.375 in / 60 mm  
Closet Front – 2 in / 51 mm  
If bothWasher and Dryer are installed together, the closet front must have at least an unobstructed  
clearance of 72 in2 or 465 cm2.YourWasher alone does not require a specific space clearance.  
SAMSUNG ClothesWasher Owner’s Instructions A-3  
 
InstallingYourWasher  
IMPORTANTTO INSTALLER  
Please read the following instructions carefully before installing yourWasher.  
These instructions should be retained for future reference  
STEP 1  
Removing the Shipping Bolts  
Before using yourWasher, you must remove the four shipping  
bolts from the back of the unit.  
1. Loosen all bolts with the supplied spanner.  
2. Slide the bolt and spacer up and remove the bolt with  
spacer through the hole in the rear wall of yourWasher.  
Repeat for each bolt.  
3. Fill the holes with the supplied plastic covers.  
4. Keep the shipping bolts and spacers for future use.  
STEP 2  
Selecting a Location  
Before you install your Washer, make sure the location:  
Has a hard, level surface  
Is away from direct sunlight  
Has adequate ventilation  
Will not be freezing (below 32°F or 0°C)  
Is away from heat sources such as coal or gas  
Has enough space so that yourWasher need not stand on its power cord  
Doesn’t have any carpeting that will obstruct ventilation openings.  
STEP 3  
Installing yourWasher  
1. Place the drain hose in the drain facility. Be sure an airtight  
connection is NOT made between the drain hose and the  
standpipe.  
Standpipe must be at least 18 in or 46 cm high.  
NOTE: Caution must always be exercised to avoid collapsing  
or damaging the drain hose. For best results, the drain  
hose should not be restricted in any way – by elbows,  
couplings, or excessive lengths. For situations where the  
drain hose cannot be conveniently elevated to at least 18  
in or 46 cm, the drain hose must be supported.  
2. Check the inlet hose to ensure a washer is inside each fill hose.  
Thread the inlet hoses to the HOT and COLD faucet connections.  
On the other end of the hose, check for one rubber washer per  
hose and install each fill hose to the water valve. Make sure the  
hose with the red line is attached to the HOT faucet. Tighten by  
hand until snug, then two-thirds of a turn with pliers.  
NOTE: For correct water use, connect both HOT and COLD  
water valves. If one is not connected,nF(no fill) error  
can occur.  
LAUNDRYTUB  
STAND PIPE  
HOSE  
RETAINER  
96MAX.  
18MIN.  
TIE  
STRAP  
96MAX.  
18MIN.  
A-4 SAMSUNG ClothesWasher Owner’s Instructions  
 
InstallingYourWasher  
3. Turn onHOTandCOLDwater supply and check all connections at  
the water valve and the faucet for leaks.  
4. Plug power cord into a 3-Prong, well grounded 120 volt 60 Hz  
approved electrical outlet protected by a 15-amp fuse or comparable  
circuit breaker.  
YourWasher is grounded through the third prong of the power cord  
when plugged into a three-prong grounded receptacle.  
5. Slide yourWasher into position.  
6. Level yourWasher by turning the leveling legs in or out as necessary  
by hand.  
When yourWasher is level, tighten the nuts using the wrench  
included with yourWasher.  
NOTE: YourWasher must be leveled on all four sides. A carpenter’s  
level should be used on all four corners of yourWasher. It’s  
a good idea after the first dozen washes to recheck your  
Washer’s levelness.  
7. If you install your washer on softfloor, you should place the rubber  
cup under adjustable leg. Before put rubber cup, please remove film  
for double-side tape attached on rubber cup.  
NOTE: If washer is installed on riser, you should put rubber cup  
under leg for riser.  
SAMSUNG ClothesWasher Owner’s Instructions A-5  
 
Operating Instructions  
LOADINGYOURWASHER  
You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.  
Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or  
wrinkling of the load.  
Wash delicate items such as bras, hosiery, and other lingerie in the Delicates/HandWash cycle with  
similar lightweight items.  
When washing big bulky items or a few smaller items that don’t fill the tub completely – a rug, a  
pillow, stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling  
and spin performance.  
When washing heavily soiled loads, not overloading yourWasher is very important to assure good  
cleaning results.  
To add a forgotten item:  
1) Press the Cycle Selector dial  
2) Wait for the Door Lock light to go out (5 seconds)  
3) Add the item, close the door, and press the Cycle Selector dial.  
After a pause of 10 seconds, the cycle will resume.  
NOTE: To ensure thorough cleaning, don’t let more than five minutes pass after starting the  
wash to add the item.  
We recommend washing bedding, towels, undergarments, and other articles that usually have  
close body contact using the SilverCare™ Option, which supports effective microorganism  
removal even in cold water.  
B-1 SAMSUNG ClothesWasher Owner’s Instructions  
 
Operating Instructions  
GETTING STARTED  
1. Load yourWasher.  
2. Close the door.  
3. Add detergent and additives to the dispenser (see pages C6~C7).  
4. Select the appropriate cycle and options for the load (see pages C2~C5).  
5. Press the Cycle Selector dial.  
6. TheWash Indicator light will illuminate.  
7. The estimated cycle time will appear in the display.  
The time may fluctuate to better indicate the wash time remaining in the cycle.  
8. Before yourWasher starts to fill, it will make a series of clicking noises to check the door lock and do  
a quick drain.  
NOTES:  
When the cycle is complete, the Door Lock light will go out andEndwill appear in the display.  
DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see  
“Loading yourWashersection.  
When yourWasher is restarted after a pause, expect a delay of up to 15 seconds before the  
cycle continues.  
Pressing Power cancels the cycle and stops yourWasher.  
The PreWash (select models), Wash, Rinse and Spin indicator lights will illuminate during those  
portions of the cycle.  
SAMSUNG ClothesWasher Owner’s Instructions B-2  
 
Washing a Load of Laundry  
OVERVIEW OFTHE CONTROL PANEL  
C-1 SAMSUNG ClothesWasher Owner’s Instructions  
 
Washing a Load of Laundry  
1. Digital graphic display  
Displays the remaining wash time, all wash information, and error messages.  
2. Temperature selection button  
Press the button repeatedly to cycle through the different water temperature options.  
Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle.  
Hot/Cold -Whites and heavily soiled, colorfast items.  
Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will be warm. The  
other rinses will be cold to conserve energy.  
Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.  
Cold/Cold - Brightly colored, very lightly soiled items; washable woolens.  
3. Spin selection button  
Press the button repeatedly to cycle through the different spin speed options.  
Extra High - Removes more water from loads during spin.  
NOTE: To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use the Extra High spin  
option for these loads, nor overload yourWasher.  
High - Use for underwear, t-shirts, jeans and sturdy cottons.  
Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.  
Low - Use for delicate items needing a slow spin speed because of fabric and construction.  
No Spin - Drains yourWasher without spinning. Use for extremely delicate items that cannot  
tolerate any spin.  
4. Soil Level selection button  
Press the button to select the Soil Level/washing time.  
Heavy - For heavily soiled loads.  
Normal - For moderately soiled loads. This setting will be appropriate for most loads.  
Light - For lightly soiled loads.  
5. Signal selection button  
Press the button to increase or decrease the end of cycle signal volume or turn off the signal.  
6. SilverCare™ button  
Silver ions are disbursed during the wash and rinse cycles to maximize microorganism removal  
even in cold water.  
Two plates of 99.9% pure silver generate silver ions in the wash and rinse water through  
electrolysis.  
This process contributes to microorganism removal from the tub as well, thereby achieving a  
‘Superior Cleansystem.  
Washing garments with SilverCare™ can save about 92% of energy compared to hot water, and is  
as effective in removing microorganisms from laundry, while at the same time preventing damage  
to delicate clothes.  
SAMSUNG ClothesWasher Owner’s Instructions C-2  
 
Washing a Load of Laundry  
7. Select Cycle Option  
Delay Start - Any cycle can be delayed for up to 12, 19 or 24hours (select models) in one-hour  
increments. Displayed hour indicates the time at which the wash will be finished.  
ExtraWash - Add additional time to the wash for better stain removal.  
Extra Rinse - Add an additional rinse at the end of the cycle to more thoroughly remove laundry  
additives and perfumes.  
Extra Spin - Add additional time to remove more water from loads  
My Cycle - Choose your favorite cycle including temperature, spin, soil level, option, etc.  
PreWash - Add detergent to the PreWash selection of the detergent compartment. Washer fills  
with cold water and detergent, tumbles, then drains and advances to the selected wash cycle.  
Some cycles cannot be selected with this option.*  
* You can`t select PreWash option in Delicate/HandWash, Wool, QuickWash and ActiveWear  
cycles.  
8. Cycle Selector  
Select the appropriate cycle for the type of load.  
This will determine the tumble pattern and spin speed for the cycle.  
NOTE: To minimize wrinkling of loads, select the Perm Press cycle.  
Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.  
Normal - For most fabrics including cottons, linens, and normally soiled garments.  
Whites - For white fabrics with or without bleach.  
Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments.  
Delicates/HandWash - For sheer fabrics, bras, lingerie silk, and other handwash-only fabrics. For  
best results, use liquid detergent.  
Wool - For machine-washable wool. Loads should be under 8 pounds.  
The wool wash cycle of this machine has been approved byWoolmark for the  
washing of machine washableWoolmark products provided that the products are  
washed according to the instructions on the garment label and those issued by  
the manufacturer of this washing machine, M0509.  
QuickWash - For lightly soiled or wrinkled garments needed quickly.  
Towels - For bath towels and washcloths. Do not load too many towels because they absorb lots  
of water.  
Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to 150°F to eliminate  
bacteria.  
NOTE: If Pause is selected during the heating portion of the Sanitize Cycle, yourWasher door will  
remain locked for your safety.  
Bedding - For bulky items such as blankets and sheets.  
ActiveWear - For washable sportswear.  
EcoWash - For geographic areas where energy and water conservation is needed. It saves 5% of  
Energy and 5% of water consumption.  
Rinse + Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load.  
Spin Only - Provides a spin to remove more water from the load.  
9. Start/Pause selection button  
Press to pause and restart programs.  
10. Power button  
Press once to turn yourWasher on, press again to turn yourWasher off. If yourWasher is left on for  
more than 10 minutes without any buttons being touched, the power automatically turns off.  
NOTE : Cycles and options vary by model. Refer to cycle chart in Appendix.  
C-3 SAMSUNG ClothesWasher Owner’s Instructions  
 
Washing a Load of Laundry  
CHILD LOCK  
A function that prevents children from playing with yourWasher.  
ACTIVATING/DEACTIVATING  
If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal buttons at the  
same time for 3 seconds.  
How It Works:  
1. Child Lock can be activated while yourWasher is running.  
2. Once you activate Child Lock, all controls (except for the Power button) will be locked until you  
deactivate Child Lock.  
3. The Child Lock button will be lit while it is in effect.  
Note: When buttons, other than the Power button, do not respond, please check if the Child  
Lock button is on.  
GARMENT +  
You can add or take out laundry items even after the wash has started, as long as the Garment+ light is  
on. Pushing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much  
water in yourWasher. If you are able to unlock the door and wish to continue the wash cycle, close the  
door and press the Start/Pause button.  
MY CYCLE  
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button  
convenience.  
By pushing the My Cycle button, you activate the settings used during the last My Cycle mode. The My  
Cycle light will indicate activation.  
You can select all options as follows in My Cycle mode.  
1. Select cycle using Cycle Selector dial.  
2. After cycle selection, set each option.  
Note: At this time, the option will follow as per each cycle’s default option selection.  
3. Then, you can start My Cycle by pushing the Start/Pause button in My Cycle mode.  
The cycle and options you select will be displayed next time you choose My Cycle.  
Note: You can change My Cycle setting by repeating same process above.  
The last used setting will be displayed at next time you choose My Cycle.  
SAMSUNG ClothesWasher Owner’s Instructions C-4  
 
Washing a Load of Laundry  
FOR SILVERCAREWASHING (SELECT MODELS)  
The SilverCare™ technology introduces pure silver ions to the wash and rinse water. They contribute to  
the removal of greater than 99.9% (Note: percentage may be higher based on further analysis of NSF  
tests) of bacteria (specified test bacteria in the U.S. EPATest Guidelines DIS/TSS 13) even in cold water  
cycles.  
Microorganisms found in washing machines can cause odors. Some bacteria and other microorganisms  
are able to remain in the washing machine despite the rigours of regular washing. In some cases these  
remaining microorganisms can grow and multiply to form biofilm inside of the washing machine.  
Samsung’s SilverCareTechnology helps to remove many bacteria and mold species from inside the  
washer, the drum of the machine, and its internal parts.  
Samsung’s SilverCareTechnology provides a 92% energy savings over hot water sanitization, but is as  
effective in removing microorganisms from laundry. Extra delicate blouses, shirts, or even lingerie that  
must washed in a cold or warm water wash can now be made as germ-free as clothes washed in the  
sanitizing cycle.  
1. Open the door, put in the clothes and close the door again.  
2. Press the Power button.  
3. Select a Cycle by turning the Cycle Selection dial.  
4. Press SilverCare™ button.  
5. Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked  
line.  
:
For PreWash, put a supplementary detergent in the dispenser.  
If SilverCare™ is used with fabric softener, microorganism removal may be less effective.  
6. Press Start/Pause button.  
:
Automatically selects optimal washing conditions by sensing the laundry’s weight.  
Note :  
FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFYTHEIR LOCALWASTETREATMENT  
AUTHORITIES BEFORE USE  
You can find # of times you used SilverCare™ option by pushing signal and SilverCare™ button.  
LU3 : less than 1000 times  
LU2 : between 1000 to 2000 times  
LU1 : between 2000 to 2999 times  
LU0 : over 2999 times  
You should replace the SilverCare™ kit when it displaysLU0. Contact 1-800-SAMSUNG.  
Note :  
For some model which has no heater if you choose SilverCare™, Temp will be fixed to Cold/Cold.  
If you changeTemp selection, the SilverCare™ option will be canceled.  
You can’t choose SilverCare™ option withWool cycle.  
C-5 SAMSUNG ClothesWasher Owner’s Instructions  
 
Washing a Load of Laundry  
DETERGENT USE  
YourWasher is designed to use high efficiency (HE) detergents.  
For best cleaning results, use a high efficiency detergent such asTide HE, Wisk  
HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors  
that reduce or eliminate suds. When less suds are produced, the load tumbles  
more efficiently and cleaning is maximized. If HE detergent is not available,  
regular detergent may be used.  
!WARNING  
Non-HE detergent is Not recommended. Please use HE detergent only.  
NOTE: Reducing the amount of detergent may reduce cleaning. It is important to pre–treat stains, sort  
carefully by color and soil level, and avoid overloading.  
*
Brand names are trademarks of their respective manufacturers.  
FEATURES  
AUTOMATIC DISPENSER  
YourWasher has separate compartments for dispensing  
detergent and color-safe bleach, chlorine bleach, and fabric  
softener. All laundry additives are added to their respective  
compartments before starting yourWasher.  
The automatic dispenser MUST ALWAYS be in place before  
starting yourWasher.  
Prewash (select models)  
Detergent  
Selector  
Detergent  
Compartment  
DO NOT open the automatic dispenser when yourWasher is  
running.  
To use:  
1. Pull out the dispenser drawer on the left side of the  
control panel.  
2. Fill appropriate compartments with laundry additives,  
being careful not to overfill or spill additives.  
3. Slide the dispenser drawer carefully and completely back into the compartment.  
DETERGENT COMPARTMENT  
1. Pour the recommended amount of laundry detergent directly into the detergent compartment  
before starting yourWasher.  
2. If color-safe bleach is to be used, it should be added with detergent to the detergent  
compartment.  
When adding color-safe bleach with detergent, it is best if both laundry products are in the  
same form – granular or liquid.  
NOTE: If using liquid detergent, lower the detergent selector and add the detergent to the  
detergent compartment.  
SAMSUNG ClothesWasher Owner’s Instructions C-6  
 
Washing a Load of Laundry  
PREWASH COMPARTMENT (SELECT MODELS)  
When using the PreWash option (select models), detergent should be added to both the PreWash  
compartment and the detergent compartment. The detergent will automatically be dispensed during  
PreWash.  
If high efficiency (HE) detergent is used, add 1/3 of the recommended amount to the PreWash  
compartment and 2/3 of the recommended amount to the detergent compartment.  
If regular detergent is used, add 1/6 of the recommended amount to the PreWash compartment  
and 1/3 of the recommended amount to the detergent compartment.  
BLEACH COMPARTMENT  
(Liquid chlorine bleach only)  
1. Add chlorine bleach to the bleach compartment.  
Bleach  
DO NOT exceed the MAX FILL line.  
Compartment  
2. Avoid splashing or over–filling the compartment.  
3. YourWasher automatically dispenses bleach into the tub  
at the appropriate time.  
Fabric Softner  
Compartment  
4. The dispenser automatically dilutes liquid chlorine  
bleach before it reaches the wash load.  
NOTES:  
Never pour undiluted liquid chlorine bleach directly  
onto the load or into the tub. It is a powerful chemical  
and can cause fabric damage, such as weakening of  
the fibers or color loss, if not used properly.  
If you prefer to use color–safe, non–chlorine bleach, add it to the appropriate detergent  
compartment.  
DO NOT pour color–safe bleach into the chlorine bleach dispenser.  
FABRIC SOFTENER COMPARTMENT  
1. Pour the recommended amount of liquid fabric softener into the softener compartment.  
For smaller loads, use less than one capful.  
2. Fabric softener should be diluted with water until it reaches MAX FILL in the compartment.  
3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse  
cycle.  
NOTES:  
Use the softener compartment ONLY for liquid fabric softeners.  
DO NOT use the Downy Ball* with thisWasher. It will not add fabric softener at the appropriate  
time.  
Use the automatic dispenser.  
*
Brand names are trademarks of their respective manufacturers.  
C-7 SAMSUNG ClothesWasher Owner’s Instructions  
 
MaintainingYourWasher  
CLEANINGTHE EXTERIOR  
Turn off the water faucets after finishing the day’s washing.  
This will shut off the water supply to yourWasher and prevent the unlikely possibility of damage from  
escaping water. Leave the door open to allow the inside of yourWasher to dry out.  
Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.  
Clean the following as recommended:  
Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads.  
Do not spray cleaners directly on the panel.  
Cabinet – Clean with soap and water.  
CLEANINGTHE INTERIOR  
Clean the interior of yourWasher periodically to remove any dirt, soil, odor, mold, mildew, or bacterial  
residue that may remain in yourWasher as a result of washing clothes.  
Use SilverCare™ option once a week to avoid buildup of odors in the drum.  
Failure to follow these instructions may result in unsatisfactory conditions, including unpleasant odor  
and/or permanent stains on yourWasher or laundry.  
Hard water deposits may be removed, if needed. Use a recommended cleaner labeledWasher safe.  
CLEANINGTHE DISPENSERS  
The Automatic Dispenser may need to be cleaned periodically due to  
laundry additive buildup.  
1. Press the release lever on the inside of the dispenser and pull out.  
2. Remove the cups from the fabric softener and bleach compartments.  
3. Wash all of the parts under running water.  
4. Clean the dispenser recess with a soft brush.  
5. Reinsert the cups, pushing them firmly into place.  
6. Push the dispenser back into place.  
7. Run a Rinse & Spin cycle without any load in yourWasher.  
Siphon Cap  
STORINGYOURWASHER  
Washers can be damaged if water is not removed from hoses and internal components before storage.  
Prepare yourWasher for storage as follows:  
Select the QuickWash cycle and add bleach to the automatic dispenser. Run yourWasher through  
the cycle without a load.  
Turn the water faucets off and disconnect the inlet hoses.  
Unplug yourWasher from the electrical outlet and leave yourWasher door open to let air circulate  
inside the tumbler.  
If yourWasher has been stored in below–freezing temperatures, allow time for any leftover water in  
yourWasher to thaw out before use.  
SAMSUNG ClothesWasher Owner’s Instructions D-1  
 
Troubleshooting  
CHECKTHESE POINTS IFYOURWASHER...  
will not start..  
Make sure door is firmly closed.  
Make sure yourWasher is plugged in.  
Make sure the water source faucets are turned on.  
Make sure to press the Cycle Selector dial to start yourWasher.  
Make sure the Child Lock is not activated; see page C4.  
Before yourWasher starts to fill, it will make a series of clicking noises  
to check the door lock and do a quick drain.  
has no water or not  
enough water..  
Turn both faucets on fully.  
Make sure the door is tightly closed.  
Make sure yourWasher is plugged in.  
Check fuse or reset circuit breaker.  
Press the Cycle Selector dial to start yourWasher.  
Straighten water inlet hoses.  
Disconnect hoses and clean screens. Hose filter screens may be  
plugged.  
Open and close the door, then press the Cycle Selector dial.  
has detergent remains  
in the automatic  
dispenser after the  
wash cycle is complete.  
Make sure yourWasher is running with sufficient water pressure.  
Make sure the Detergent Selector dial is in the upper position when  
using granular detergent.  
vibrates or is too noisy.  
Make sure yourWasher is set on a level surface. If the surface is not  
level, adjust yourWasher feet to level the appliance.  
Make sure that the shipping bolts are removed.  
Make sure yourWasher is not touching any other object.  
Make sure the laundry load is balanced.  
stops  
Plug cord into live electrical outlet.  
Check fuse or reset circuit breaker.  
Close door and press the Cycle Selector dial to start yourWasher. For  
your safety, yourWasher will not tumble or spin unless the door is  
closed.  
Before yourWasher starts to fill, it will make a series of clicking noises  
to check the door lock and do a quick drain.  
There may be a pause or soak period in the cycle. Wait briefly and it  
may start.  
Check screens on inlet hoses at the faucets for obstructions. Clean  
screens periodically.  
E-1 SAMSUNG ClothesWasher Owner’s Instructions  
 
Troubleshooting  
fills with the wrong  
temperature water.  
Turn both faucets on fully.  
Make sure temperature selection is correct.  
Make sure hoses are connected to correct faucets. Flush water lines.  
Check the water heater. It should be set to deliver a minimum 120°  
F (49° C) hot water at the tap. Also check water heater capacity and  
recovery rate.  
Disconnect hoses and clean screens. Hose filter screens may be  
plugged.  
As yourWasher is filling, the water temperature may change as  
the automatic temperature control feature checks incoming water  
temperature. This is normal.  
While yourWasher is filling, you may notice just hot and/or just  
cold water going through the dispenser when cold or warm wash  
temperatures are selected. This is a normal function of the automatic  
temperature control feature as yourWasher determines the  
temperature of the water.  
won’t tumble.  
Check fuse or reset circuit breaker.  
Close the door and press the Cycle Selector dial. For your safety, your  
Washer will not tumble or spin unless the door is closed.  
door locked shut or  
will not open.  
Press the Cycle Selector dial to stop yourWasher.  
YourWasher door will remain locked during the heating portion of the  
Sanitize Cycle  
It may take a few moments for the door lock mechanism to disengage.  
does not drain and/or  
spin.  
Check fuse or reset circuit breaker.  
Straighten drain hoses. Eliminate kinked hoses. If there is a drain  
restriction, call for service.  
Close the door and press the Cycle Selector dial. For your safety, your  
Washer will not tumble or spin unless the door is closed.  
load is too wet at the  
end of the cycle.  
Use the High or Extra High spin speed.  
Use high efficiency detergent to reduce over–sudsing.  
Load is too small. Very small loads (one or two items) may become  
unbalanced and not spin out completely.  
leaks water.  
Make sure door is firmly closed.  
Make sure hose connections are tight.  
Make sure end of drain hose is correctly inserted and secured to drain  
facility.  
Avoid overloading.  
Use high efficiency detergent to prevent over–sudsing.  
has excessive suds.  
Use high efficiency detergent to prevent over-sudsing.  
Reduce detergent amount for soft water, small or lightly soiled loads.  
Non-HE detergent is NOT recommended.  
Exposure to silver may result in skin irritation and/or allergic reaction in some people. If skin irritation  
or dermal allergies develop, discontinue the use of the washing machine using the silver ion cycle,  
wearing clothing washed using the silver ion cycle, and seek medical attention.  
SAMSUNG ClothesWasher Owner’s Instructions E-2  
 
Troubleshooting  
INFORMATION CODES  
Information codes may be displayed to help you better understand what is occurring with yourWasher.  
Code Symbol Meaning Solution  
Unbalanced load prevented your Redistribute the load, press the Cycle Selector  
Washer from spinning.  
dial.  
Door is unlocked whenWasher  
is running.  
Press the Power button to turn off yourWasher,  
then restart the cycle. If the code reappears,  
call for service. See below.  
Door is open whenWasher is  
running.  
Close the door tightly and restart the cycle.  
If the code reappears, call for service.  
See below.  
YourWasher failed to lock the  
door.  
Close the door tightly and restart the cycle.  
If the code reappears, call for service.  
See below.  
Water temperature control  
problem.  
Call for service. See below.  
(Heater Control problem)  
YourWasher has tried to fill but  
has not reached the proper water  
level.  
Call for service. See below.  
The door will not unlock.  
Make sure the door is firmly closed.  
Push the Power button to turn off yourWasher,  
then turn it on again. If the code reappears, call  
for service. See below.  
Motor not running properly.  
Your washer is not draining.  
Restart the cycle pressing the Cycle Selector  
dial. If the code reappears, call for service.  
See below.  
Before calling for service, check the following.  
But, it can light up when the unit 1)Turn off the unit and turn it on again.  
senses a brief restriction while  
draining.  
2) Select the Spin Only  
3) Press the Start/Pause to drain the water.  
If it still does not drain, call for service.  
YourWasher has tried to fill but  
was unsuccessful.  
Make sure the water faucets are open all the  
way. Check for kinked hoses.  
Check inlet screens on fill hoses.  
E-3 SAMSUNG ClothesWasher Owner’s Instructions  
 
Troubleshooting  
Code Symbol  
Meaning  
Solution  
Problem with control.  
Call for service. See below.  
Electric service was lost when  
Washer was running.  
Restart the cycle by pressing the Cycle Selector  
dial.  
A fault is detected in the water  
level sensor.  
Call for service  
Call for service  
Jammed Key.  
Motor speed sensor problem.  
Temperature sensor problem.  
High current detected.  
Restart the cycle.  
If the code reappears, call for service, see below  
Restart the cycle.  
If the code reappears, call for service, see below  
Restart the cycle.  
If the code reappears, call for service, see below  
High/Low voltage detected.  
Vibration sensor problem.  
SilverCare™ control problem  
Restart the cycle.  
If the code reappears, call for service, see below  
Restart the cycle.  
If the code reappears, call for service, see below  
Restart the cycle.  
If the code reappears, call for service, see  
below.  
Too much SUdS is detected  
during the washing session. And,  
the unit is put on hold until the  
suds get reduced. Then, it will go  
back to the operation. When it  
finishes washing, End and SUdS  
codes will blink in turn.  
To prevent it, cut down on detergents.  
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)  
SAMSUNG ClothesWasher Owner’s Instructions E-4  
 
Appendix  
FABRIC CARE CHART  
The following symbols provide garment care directions without words. The care label will include, in  
order, four symbols: washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of  
symbols ensures consistency among garment manufacturers of domestic and imported items. Follow  
care label directions to maximize garment life and reduce laundering problems.  
Wash Cycle  
Normal  
Special Instructions  
Warning Symbols for Laundering  
Line Dry/ Hang  
to Dry  
Do NotWash  
Permanent Press/Wrinkle  
Resistant/Wrinkle Control  
Drip Dry  
Dry Flat  
Do NotWring  
Do Not Bleach  
Gentle/Delicates  
HandWash  
Heat Setting  
High  
Do NotTumble Dry  
No Steam (added to iron)  
Do Not Iron  
WaterTemperature**  
Hot  
Medium  
Low  
Warm  
Cold  
Any Heat  
Bleach  
No Heat/Air  
Any Bleach (when needed)  
Iron-Dry or SteamTemperatures  
Line Dry/ Hang to Dry  
Drip Dry  
Only Non-Chlorine  
(color-safe)  
High  
Bleach (when needed)  
Tumble Dry Cycle  
Medium  
Low  
Dry Flat  
Normal  
For machine-washable  
wool. Loads should be  
under 8 pounds.  
Permanent Press/Wrinkle  
Resistant/Wrinkle Control  
Dryclean  
Gentle/ Delicates  
Dry Clean  
Do Not Dry Clean  
** The dot symbols represent appropriate wash water temperatures for various items. The  
temperature range for Hot is 105° - 125° F/ 41° - 52°C, forWarm 85° - 105° F/29° - 41° C and for Cold  
60° - 85° F/16° - 29° C. (Wash water temperature must be a minimum of 60° F/16°C for detergent  
activation and effective cleaning.)  
The clothesWasher may not ensure these temperatures because the actual water temperatures  
entering yourWasher are dependent on water heater settings and regional water supply  
temperatures. For example, cold water entering the home in the northern states during winter  
may be 40° F/4° C which is too cold for effective cleaning. The water temperature in this situation  
will need to be adjusted by selecting a warm setting, adding some hot water to the MAX FILL line  
or using yourWasher’s heating option, if available.  
F-1 SAMSUNG ClothesWasher Owner’s Instructions  
 
Appendix  
PROTECTINGTHE ENVIRONMENT  
YourWasher is manufactured from recyclable materials. If you decide to dispose of it, please  
observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be  
connected to a power source.  
Remove the door so that animals and small children cannot get trapped inside the appliance.  
Do not exceed the detergent quantities recommended in the detergent manufacturers’  
instructions.  
Use stain removal products and bleaches before the wash cycle only when strictly necessary.  
Save water and electricity by only washing full loads (the exact amount depends upon the  
program used).  
Use SilverCareTM instead of HotWater Sanitization in order to save energy.  
DECLARATION OF CONFORMITY  
This appliance complies with UL2157.  
SPECIFICATION  
TYPE  
FRONT LOADING DRYER  
DIMENSION  
Div  
Inches (cm)  
Div  
Inches (cm)  
A. Height  
- Overall  
38(96.5)  
C. Depth with  
door open 90°  
49(124.5)  
B. Width  
27(68.6)  
D. Depth  
30.25(77.0)  
WATER PRESSURE  
WEIGHT  
50 kPa ~ 800 kPa  
89.9 kg  
HEATER RATING  
3.29 Cu.ft  
POWER CONSUMPTION WASHING  
WASHING AND HEATING  
120V  
120V  
120V  
120V  
226W  
997W  
379W  
41W  
SPIN  
DRAIN  
SPIN REVOLUTION  
WF326 *  
WF316 *  
WF306 *  
WF206 *  
1200rpm  
1100rpm  
1000rpm  
1000rpm  
C
D
A
B
SAMSUNG ClothesWasher Owner’s Instructions F-2  
 
Appendix  
CYCLE CHART  
326LAS  
Functions  
Spin  
Options  
Temp  
EH/C H/C W/W W/C C/C EH  
Soil Level  
Time  
Pre- Extra Silver-  
Delay Extra Extra My  
Start Wash Rinse Cycle wash Spin Care™  
H
M
L
NS  
H
N
L
Heavy  
Duty  
                    
                    
                    
92  
53  
62  
47  
41  
57  
35  
66  
112  
71  
51  
47  
20  
11  
Normal  
Whites  
Perm  
Press  
    
    
               
Delicates/  
Hand  
Wash  
       
   
   
Wool  
Quick  
Wash  
              
   
Towels  
                    
Sanitize   
Bedding  
                
    
    
              
Active  
Wear  
         
   
Eco Wash  
                    
Rinse +  
Spin  
       
   
   
Spin Only  
      
F-3 SAMSUNG ClothesWasher Owner’s Instructions  
 
Appendix  
206LNW  
Functions  
Spin  
Options  
Temp  
Soil Level  
Time  
Delay Start Extra Wash Extra Rinse  
H/C W/W W/C C/C  
H
M
L
NS  
H
N
L
Heavy Duty  
Normal  
            
            
            
           
            
      
67  
53  
62  
47  
66  
20  
11  
Whites  
Perm Press  
Towels  
Rinse + Spin  
Spin Only  
     
SAMSUNG ClothesWasher Owner’s Instructions F-4  
 
Appendix  
316LAW, 316LAS, 316BAW, 316HAC  
Functions  
Spin  
Options  
Temp  
Soil Level  
N
Time  
Pre- Silver-  
Delay Extra Extra My  
Start Wash Rinse Cycle wash Care™  
EH/C H/C W/W W/C C/C EH  
H
M
L
NS  
H
L
Heavy  
Duty  
                   
                   
                   
92  
53  
62  
47  
41  
57  
35  
66  
112  
71  
20  
11  
Normal  
Whites  
Perm  
Press  
    
    
              
Delicates/  
Hand  
Wash  
       
   
   
Wool  
Quick  
Wash  
              
   
Towels  
                   
Sanitize   
Bedding  
               
    
             
Rinse +  
Spin  
       
   
Spin Only  
      
F-5 SAMSUNG ClothesWasher Owner’s Instructions  
 
Appendix  
SAMSUNG SILVERCAREWASHER  
LIMITEDWARRANTYTO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.  
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted  
by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty  
period of:  
One (1)Year All Parts and Labor, Two (2)Years Control Board Parts, Five (5)Years Motor, and Lifetime  
StainlessTub  
This limited warranty begins on the original date of purchase, and is valid only on products purchased  
and used in CANADA. To receive warranty service, the purchaser must contact SAMSUNG for problem  
determination and service procedures. Warranty service can only be performed by a SAMSUNG  
authorized service center. The original dated bill of sale must be presented upon request as proof of  
purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service  
during the warranty period at no charge, subject to availability within the contiguous Canada. In-home  
service is not available in all areas.  
To receive in-home service, product must be unobstructed and accessible to the service agent. If service  
is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized  
service center.  
SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein,  
with new or reconditioned parts or products if found to be defective during the limited warranty period  
specified above. All replaced parts and products become the property of SAMSUNG and must be  
returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or  
ninety (90) days, whichever is longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in  
normal, noncommercial use of this product and shall not apply to the following: damage that occurs  
in shipment; delivery and installation; applications and uses for which this product was not intended;  
altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire,  
water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services,  
parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied  
or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical  
line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,  
maintenance and environmental instructions that are covered and prescribed in the instruction book;  
product removal and reinstallation; problems caused by pest infestations. This limited warranty does  
not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses,  
house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not  
warrant uninterrupted or error-free operation of the product.  
SAMSUNG ClothesWasher Owner’s Instructions F-6  
 
Appendix  
EXCEPT AS SET FORTH HEREIN, THERE ARE NOWARRANTIES ONTHIS PRODUCT EITHER EXPRESS OR  
IMPLIED, AND SAMSUNG DISCLAIMS ALLWARRANTIES INCLUDING, BUT NOT LIMITEDTO, ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO  
WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATIONWITH RESPECTTOTHIS  
PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE  
OR PROFITS, FAILURETO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES CAUSED BYTHE USE, MISUSE, OR INABILITYTO USETHIS PRODUCT,  
REGARDLESS OFTHE LEGALTHEORY ONWHICHTHE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS  
BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.  
NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNTTHANTHE  
PURCHASE PRICE OFTHE PRODUCT SOLD BY SAMSUNG AND CAUSINGTHE ALLEGED DAMAGE.  
WITHOUT LIMITINGTHE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,  
DAMAGE, OR INJURYTO PURCHASER AND PURCHASER’S PROPERTY ANDTO OTHERS ANDTHEIR  
PROPERTY ARISING OUT OFTHE USE, MISUSE, OR INABILITYTO USETHIS PRODUCT. THIS LIMITED  
WARRANTY SHALL NOT EXTENDTO ANYONE OTHERTHANTHE ORIGINAL PURCHASER OFTHIS  
PRODUCT, IS NONTRANSFERABLE AND STATESYOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or  
limitation of incidental or consequential damages, so the above limitations or exclusions may not apply  
to you. This warranty gives you specific rights, and you may also have other rights, which vary from state  
to state.  
To obtain warranty service, please contact SAMSUNG at:  
SAMSUNG ELECTRONICS CANADA, INC. – CONSUMER ELECTRONICS CUSTOMER SERVICE  
55 STANDISH COURT, MISSISSAUGA, ON L5R 4B2  
1-800-SAMSUNG (1-800-726-7864)  
F-7 SAMSUNG ClothesWasher Owner’s Instructions  
 
Memo  
SAMSUNG ClothesWasher Owner’s Instructions F-8  
 
Contact SAMSUNGWORLDWIDE  
If you have any questions or comments relating to Samsung products, please  
contact the SAMSUNG customer care center.  
Samsung Electronics Canada, Inc.  
1-800-SAMSUNG (726-7864)  
 

Q Logic Network Hardware FC0054607 00 A User Guide
RCA Cassette Player RP 1880 User Guide
RCA Universal Remote RCR450 User Guide
RedMax Trimmer CHT2250 User Guide
Samsung Cell Phone A640 User Guide
Samsung Tablet SM T530NYKAX User Guide
Sanyo Air Conditioner V3622 C3622 User Guide
Seagate Laptop ST320LM002 User Guide
Sears Lawn Mower 33731 User Guide
Sennheiser Headphones 09917 User Guide